Maintenance of interior doors

Let's start the article interior door care with a simple truth: the more thorough the care, the longer the appearance of the doors is preserved. Each coating requires individual self-care. We will talk about it, and at the end of the article we will describe the general principles of " content” for all types of doors.

Care of laminated doors on your own

The most unpretentious and not capricious coating. First, let's consider the options that are unacceptable for cleaning it. Do not use products with abrasive particles, they cause external damage to the doors. It is better to abandon chemistry, the substances in such products react with the elements of the laminate, which leads to the future destruction of the structure of the material.

A mixture of water and alcohol will save us. Another plus is that it can be prepared at home. It is very important to observe the ratio of 9:1, this is the main rule.

The procedure for cleaning the door:

	The coating is washed with a solution
	The door is dried dry

The procedure does not require frequent repetition, it is enough 1-2 times a year.

Maintenance of interior doors made of veneer

Such doors tend to fade during operation, in the future they show damage. It's all about the furniture varnish that covers the products. Wounds are healed in the following way: the problem areas are wetted and carefully sanded with a fine skin. Take a polish or furniture wax and gently rub it until the shine appears and the damage disappears. In a serious situation, it is necessary to treat the entire surface of the door.

- Only a few products for the care of veneer doors are suitable, in particular, wax, polish and the same mixture of alcohol and water;

- Splash out a moderate amount of liquids when rinsing;

- The surface should be perfectly dry, without a hint of moisture.

Conclusion: veneered doors require special care for themselves.

Solid solid wood doors

The most difficult and demanding coating on our list. Special and expensive equipment is used for production, which affects the operation. The doors are not protected, they are more prone to combat wounds and take more energy when leaving, although they live longer than other options. Main materials: beech, oak, pine.

Basic principles of furniture care:

1) We have already written about the susceptibility of the canvas to damage, so no acetone, chemicals and powders. Pine doors can be polished with a weak soap solution. For other coatings, traditional processing tools are suitable.
2) For the safety of products during repair, they should be covered with polyethylene or completely removed from the hinges.
3) Wood does not react well to high humidity and temperatures, protect the material from exposure.

Minor damages and scratches are removed in a simple way. Lightly moisten the injured surface, then treat it with a fine and soft sandpaper. Finish the process by applying a thin layer of polishing wax. During a routine inspection, it is necessary to remove the furniture itself, grease, fasteners and adjustment from the hinges. It is recommended to conduct it once every 6 months.

General operating tips

We will conclude the article with the basic rules of caring for doors made of any coatings:

1) Resist the temptation to slam the furniture once again and move your foot on it.
2) Even the most reliable coating does not withstand strong impact, so protect the products from temperature changes, getting wet, chipping and other factors.
3) Clean the door every six months, you can do this during the inspection. To the rescue, we will come to the familiar solution of alcohol and water, which is suitable for all coatings. The main thing is to remember about the 9:1 ratio.
4) Carry out annual lubrication of handles, hinges and mechanisms with machine oil.

Pub date: 2017.07.20